Tachen Acero Inoxidable
El acero inoxidable es un acero de elevada pureza y resistente a la corrosión, dado que el cromo, u otros metales que contiene, posee gran afinidad por el oxígeno y reacciona con él formando una capa pasivadora, evitando así la corrosión del hierro.
La amplia gama de especialidades de acero inoxidable de Ta chen incluye:
WELDED PIPE:
Specification : ASTM A312, ASTM A778
Grade : 304/L, 316/L - Size : 1/4″ Thru 24″
Schedule : 5s, 10s, 20, 40s, 80s
SEAMLESS PIPE:
Specification : ASTM A312
Grade : 304/L, 304H, 316/L, 2205
Size : 1/4″ Thru 16″
Schedule : 10s, 40s, 80s, 120,160 and XXH
SEAMLESS MECHANICAL:
Specification : ASTM A511
Tubing Grade : 304/L, 316/L,
Size : 1″ Thru 10″
Thickness: 0.188″, 0.250″, 0.375″, 0.500″, 0.75″ and 1″
SEAMLESS INSTRUMENTATION TUBING:
Specification : ASTM A213/A269
Grade : 304/L, 316/L - Size : 1/4″ Thru 1″
Thickness: 0.028, 0.035, 0.049, 0.065, 0.083, 0.095, 0.120″
SANITARY TUBING:
Specification : ASTM A270
Grade : 304/L, 316/L - Size : 1/2″ Thru 8″
Thickness : 0.065″, 0.083″, 0.109
WELDED TUBING:
Specification : ASTM A249/A269
Grade : 304/L and 316/L
Size : 1/4″ Thru 4″
Thickness: 0.028, 0.035, 0.049, 0.065, 0.083, 0.120″
FLANGES:
Specification : A182 - Grade : 304/L, 316/L
Size : 1/2″ Thru 24″
Pressure Rating : 150#, 300#, 600#, 900#, 1500# and 2500#
Kind : Slip-On, Blind, Lap-Joint, Threaded
Weld-Neck and Socket Weld ( Sch10s, 40s and 80s)
BUTTWELD FITTINGS WELDED & SEAMLESS:
Specification : A403WPW, A403WPX, A403WPS
Size : 1/2″ Thru 24″
Schedule : Sch10s, Sch40s and Sch80s
Kind : LR 90, SR 90, 45, Tee, Red. Tee, Caps,
Concentric and Eccentric Reducer
Type A and Type C Stub Ends
150 LBS INVESTMENT CASTING:
Grade : 304, 316
Size : 1/8″ Thru 6″
End Type : Threaded and Socket Weld
Kind : 90, 45, ST. 90, Coupling, Half Coupling
Reducing Coupling, Hex Bushing, Square and
Hex Plug, Union, Cross, Cap, Tee and MSS SP114.
3000 / 6000 LBS FORGED FITTING:
Specification : A182
Grade : 304/L, 316/L
Size : 1/4″ Thru 4″
End Type : Threaded and Socket Weld
Kind : 90, 45, ST. 90, Coupling, Half Coupling
Reducing Coupling, Hex Bushing, Square and
Hex Plug, Union, Cross, Cap, Tee, O-Lets
PLATE FLANGES:
Grade : 304, 316
Size : 1″ Thru 12″
Kind : Pipe Slip On, Tube Slip On and Blind
NIPPLE TBE:
Grade : 304/L, 316/L
Size : 1/4″ Thru 6″
End Type : Threaded
Schedule : Sch40s and Sch80s.
ROUND BAR 12 FT. R/L
.125″ thru 20″ Diameter
In grades 303, 304,304/304L, 316, 316/316L,
416, 410, 630
Specs: QQS – ASTM – ASME – AMS
HEXAGON COLD DRAWN BARS 12 FT. R/L
.188″ thru 3″
In grades 303, 304, 304/304L, 316/316L, 416
Specs: QQS – ASTM – ASME – AMS
SQUARE BARS COLD DRAWN 12 FT. R/L
.188″ thru 3″
In grades 303, 304, 304/304L, 316/316L
Specs: QQS – ASTM – ASME – AMS
HALF ROUND BAR 20 FT. R/L
.500″, .625″, .750″
Specs: QQS – ASTM
FLAT BAR (HRAP) 12 FT. R/L
Thickness: .125″ to 3″ Widths: .500″ to 6″
In grades 303, 304/304L, 316/316L
Specs: QQS – ASTM – ASME – AMS
PLATE CUT FLATS – 1/8″ TO 1/2″ THICK by 1/2″
TO 8″ WIDE / 17-4 as an available grade
ANGLES 20 FT. R/L
.500 to 6″ Leg and from .125 to .500″ Thickness
In grades 304, 304/304L, 316/316L
Specs: QQS – ASTM – ASME – AMS
UNEQUAL LEG ANGLE 20 FT. R/L
2″ x 1″ x .250″ to 6″ x 4″ x .500″
In grades 304/304L, 316/316L
Specs: QQS – ASTM – ASME
CHANNEL 20 FT. R/L
1.5″ x .750″ x .125″ to 15″ x 33.9/lb
In grades 304/304L, 316/316L
Specs: QQS – ASTM – ASME
BEAMS
3″ x 5.7/lb. to 12″ x 22/lb
In grades 304/304L, 316/316L
Specs: QQS – ASTM – ASME
T-BAR
1″ x 1″ x .125″ to 4″ x 4″ x .375″
In grades 304/304L, 316/316L
Specs: QQS – ASTM – ASME
17-4
Solution Annealed: .25″ thru 6″ Diameter
DH1150: 1″ thru 10″ Diameter
Somos distribuidores directos de marca y entregamos a toda la República Mexicana.
Para mayor información y cotizaciones, contáctanos al 01-800-026-7425 | info@regalmex.com
O platica directamente con un representante en nuestro Chat Online (esquina inferior derecha).